Concrete
Laboratory testing of hardened concrete
Determination of compressive strength EN 12390-3
Body density test MSZ EN 12390-7
Determination of flexural and tensile strength MSZ EN 12390-5
Determination of splitting tensile strength EN 12390-6
Watertightness test XV EN 12390-8
Frost resistance test (peel, 56 cycles) MSZ CEN/TS 12390-9
Determining shrinkage EN 12390:16
Coefficient of thermal expansion own specification
Determining the modulus of elasticity MSZ EN 12390-13
Abrasion resistance meghatározása – Böhme féle vizsgálati eljárás MSZ 18290-1
Determination of chloride ion content in 3 layers of samples taken on site using a spectrophotometric test method e-UT 07.04.13, e-UT 09.04.21, MSZ EN 14629, MSZ EN 14630, own specification
Cutting core samples to size and preparing them for strength testing MSZ EN 12390-2, own specification
pH value determination e-UT 09.04.21
Carbonation test e-UT 09.04.21
Testing of steel fiber reinforced concrete
Test method for determining the residual flexural-tensile strength of steel fiber reinforced concrete MSZ EN 14651:2005+A1:2008
Test method for steel fiber concrete. Determination of fiber content in fresh concrete MSZ EN 14721:2005+A1:2008 – A 
Test method for steel fiber concrete. Determination of fiber content in hardened concrete MSZ EN 14721:2005+A1:2008 – B
On-site inspection of hardened concrete
Schmidt hammer approximate concrete strength test e-UT 09.04.21
Schmidt hammer approximate concrete strength testing using fracture results of drilled core samples MSZ EN 12504-2
Determining the speed of propagation of ultrasound MSZ EN 12504-4
Core sampling from structural concrete Ø100 mm  MSZ 4715-3; MSZ EN 12504-1
Core sampling from structural concrete Ø60 mm MSZ 4715-3; MSZ EN 12504-1
Concrete cover inspection own specification
Adhesion and tensile strength test perpendicular to the surface e-UT 07.03.25
Testing of shotcrete
Adhesion strength of drilled core by direct pull BS EN 14488-4:2005+A1:2008
Determination of the energy absorption capacity of fiber-reinforced sheet specimens MSZ EN 14488-5
Determination of the flexural strength of fiber-reinforced beam specimens EN 14488-3:2024
Testing of building stone materials
Determination of particle size distribution. Sieve test MSZ EN 933-1:2012 
Clay-silt content determination MSZ 18288-2:1984 
Determination of water content MSZ EN 1097-5
Abrasion resistance meghatározása – Böhme féle vizsgálati eljárás MSZ EN 14157
Precast concrete elements
Precast concrete products, testing of glass fiber reinforced concrete
Durability testing with cyclic climatic testing EN 1170-8
Determination of extreme values of dimensional changes due to moisture content MSZ EN 1170-7
Determination of water absorption by immersion and determination of body density in a dry state MSZ EN 1170-6
Measuring flexural strength, the “full flexural test” method EN 1170-5
Measuring flexural strength, the “simplified flexural test” method MSZ EN 1170-4:2000
Testing of concrete paving elements
Surface appearance EN 1338:2003
Coating layer thickness EN 1338:2003
Examination of formal requirements EN 1338:2003
Splitting tensile strength and breaking load EN 1338:2003
Abrasion resistance  EN 1338:2003
Slip/friction resistance EN 1338:2003
Weather resistance water absorption test EN 1338:2003
Weather resistance edge peeling with 3m% NACl solution EN 1338:2003
Testing concrete pavements
Surface appearance EN 1339:2003
Coating layer thickness EN 1339:2003
Examination of formal requirements EN 1339:2003
Splitting tensile strength and breaking load EN 1339:2003
Abrasion resistance  EN 1339:2003
Slip/friction resistance EN 1339:2003
Weather resistance water absorption test EN 1339:2003
Weather resistance edge peeling with 3m% NACl solution EN 1339:2003
Testing of concrete curb elements and prefabricated concrete ditch elements
Surface appearance MSZ EN 1340:2003
Coating layer thickness MSZ EN 1340:2003
Examination of formal requirements MSZ EN 1340:2003
Splitting tensile strength and breaking load MSZ EN 1340:2003
Abrasion resistance  MSZ EN 1340:2003
Slip/friction resistance MSZ EN 1340:2003
Weather resistance water absorption test MSZ EN 1340:2003
Weather resistance edge peeling with 3m% NACl solution MSZ EN 1340:2003
Concrete roof tiles and shaped tiles for roofing and wall cladding
Concrete roof and profile tiles (Dimensions: hanging length and waist width) According to MSZ EN 490:2011+A1:2017;EN 491:2011 Section 5.2 and EN 491:2011 Section 5.2.2.1
Concrete roof and profile tiles (Dimensions: coverage width) MSZ EN 490:2011+A1:2017; Grooved tile: according to EN 491:2011 section 5.3.3.1. non-grooved according to EN 491:2011 section 5.3.3.2.
Concrete roof and profile tiles (Dimensions: flatness) According to MSZ EN 490:2011+A1:2017 and EN 491:2011, section 5.4.
Concrete roof tiles and profiles (Weight) According to MSZ EN 490:2011+A1:2017 and EN 491:2011 section 5.5
Concrete roof tiles and profiles (Fixing holes) MSZ EN 490:2011+A1:2017; According to MSZ EN 490:2011+A1:2017 standard, section 5.4. and Annex C
Concrete roof tiles and profiles (Mechanical resistance (load capacity)) According to MSZ EN 490:2011+A1:2017 and EN 491:2011, section 5.6.
Concrete roof tiles and profiles (Waterproofing) According to MSZ EN 490:2011+A1:2017 and EN 491:2011, section 5.7.
Concrete roof tiles and profiles (Durability (frost resistance)) According to MSZ EN 490:2011+A1:2017 and EN 491:2011, section 5.8.
Concrete roof and profile tiles (Suspension lugs) MSZ EN 490:2011+A1:2017 és EN 491:2011 5.9. szakasz szerint
Mortar, screed
Mortar testing
Taking aggregate samples from mortars and preparing test mortars EN 1015-2:1999
Determination of the bulk density of hardened mortar MSZ EN 1015-10:2000
Determination of the capillary water absorption coefficient of hardened mortar MSZ EN 1015-18:2003
Determination of flexural and compressive strength of hardened mortar MSZ EN 1015-11:2020  
Determination of the adhesion strength of solid plaster mortars on a substrate MSZ EN 1015-12:2016
Determination of compressive strength MSZ EN 1052-1
Determination of flexural strength  MSZ EN 1052-2
A kezdeti nyírószilárdság meghatározása „B” eljárás MSZ EN 1052-3
Determination of shear strength together with the moisture barrier layer MSZ EN 1052-4:2000
Determination of the modulus of elasticity of a mortar product MSZ EN 13412
Screed inspection
On-site moisture testing of screed mortars MI 01:2017 Screed floors
Determination of flexural and compressive strength of screed mortars MSZ EN 13892-2
Determination of abrasion resistance of screed mortars according to Böhme MSZ EN 13892-3
Determination of adhesive strength of screed mortars MSZ EN 13892-8
Ceramics
Testing of ceramic cladding and masonry elements
Ceramic tile water absorption test, water absorption, open porosity, apparent relative density and bulk density MSZ EN ISO 10545-3
Ceramic tiles on a sample prepared as a system MSZ EN 12004-2
Frost resistance test MSZ 551-1
Determination of compressive strength MSZ EN 772-1:2011+A1:2015
Determination of the percentage of void volume of concrete masonry units (using paper impression method) MSZ EN 772-2:2000
Determination of the net volume and void percentage of fired clay masonry units by hydrostatic weighing MSZ EN 772-3:2000
Determination of active soluble salt content of fired clay masonry units MSZ EN 772-5:2016
Determination of tensile strength of admixed concrete masonry units MSZ EN 772-6:2002
Determination of void and net volume and percentage void ratio of sand-lime masonry elements with sand filling MSZ EN 772-9:2000
Determination of moisture content of sand-lime and aerated concrete masonry units MSZ EN 772-10:2000
Determination of the capillary-based water absorption of aggregate concrete, aerated concrete, artificial stone and natural stone masonry elements, as well as the initial water absorption value of fired clay masonry elements MSZ EN 772-11:2011
Determination of net and gross dry bulk density of masonry units (excluding natural stone) MSZ EN 772-13:2000
Determination of moisture movement of admixed concrete and artificial stone masonry elements MSZ EN 772-14:2002
Determining the dimensions MSZ EN 772-16:2011
Determination of frost resistance of sand-lime masonry elements MSZ EN 772-18:2011
Determining the surface flatness of masonry elements MSZ EN 772-20:2021
Determination of water absorption in cold water of burnt clay and lime sand masonry elements MSZ EN 772-21:2011
Testing of fired clay roof and accessory tiles
Overlapped fired clay roof tiles. Testing of bending and breaking strength MSZ EN 538
Overlapped fired clay roofing tiles. Determination of physical properties. Part 1: Test of water retention capacity MSZ EN 539-1
Overlapped fired clay roofing tiles – Determination of physical properties – Part 2: Test for frost resistance MSZ EN 539-2
Overlapped fired clay roof tiles. Determination of geometric characteristics MSZ EN 1024
Steel
On-site inspection of steel structures
Paint layer thickness test MSZ EN 1461
Determination of steel material strength with Poldi hammer MSZ-05-83.2100:1981
Ultrasonic wall thickness measurement MSZ EN ISO; 10893-12 MSZ EN 14127
Visual inspection of corrosion protection coating systems for steel structures MSZ EN ISO 4628 1-8
Testing and evaluation of corrosion protection coating systems for steel structures, measurement of adhesion strength MSZ EN ISO 4624
Testing and evaluation of corrosion protection coating systems for steel structures, measurement of dry layer thickness MSZ EN ISO 2808
Testing of reinforcing steel
Tensile testing of reinforcing steel up to d=24 mm MSZ EN ISO 6892-1:2020
Bending test of reinforcing steel MSZ EN ISO 7438:2016
Thermal insulation materials
Testing of thermal insulation materials
Determination of the force corresponding to 10% compression MSZ EN 826
Body density MSZ EN 1602
Determination of dimensional stability in a space with a given temperature and humidity MSZ EN 1604
Deformation under specific compressive load and temperature MSZ EN 1605
Determination of creep under pressure MSZ EN 1606
Determination of tensile strength perpendicular to the surface MSZ EN 1607
Determination of water absorption during short-term partial immersion MSZ EN 1609
Determination of vapor permeability properties MSZ EN 12086
Determination of water absorption during long-term immersion MSZ EN 12087
Long-term vapor diffusion water uptake (XPS) MSZ EN 12088 
Determination of bending behavior (bending strength) MSZ EN 12089
Freeze-thaw resistance MSZ EN 12091
Determination of thermal conductivity MSZ EN 12667
Determination of tensile strength MSZ EN 13163
Determination of dynamic stiffness MSZ EN 29052-1
Point load (at 5mm compression) EN 12430
Compressibility (for insulations suitable for floating substrates) MSZ EN 12431
Water absorption during short-term immersion in water MSZ EN ISO 29767
Water absorption during prolonged immersion in water MSZ EN 16535
Wood
Structural wood testing
Determination of the total bending modulus of elasticity of structural wood MSZ EN 408
Determining the density of structural wood MSZ EN 408
Determination of the compressive strength of structural wood in the grain direction MSZ EN 408
Determining the moisture content of structural wood MSZ EN 408; MSZ EN 13183-1
Railway
Railway track fastening inspection
Rail fastening: Determining the clamping force MSZ EN 13146-7
Rail fastening: Vertical static load own specification
Rail fastening: Inclined static load MSZ EN 13481-2MSZ EN 13481-5
Rail fastening: Determination of the longitudinal component of the fastening force MSZ EN 13146-1
Rail reinforcement: Determination of the torsional strength (rotational resistance) of the rail reinforcement MSZ EN 13146-2
Dimensions, uniaxiality MÁVSZ 2938
Surface MÁVSZ 2938
Hardness test MÁVSZ 2938
Sedimentation test MÁVSZ 2938
Spring travel test MÁVSZ 2938
Railway cross-beam inspection
Examination of formal requirements own specification
Inspection of the under-rail cross-section in the installation position (loading of the under-rail cross-section for positive moment) MSZ EN 13230-2
Statikus terhelési vizsgálatok – az alj középső keresztmetszetének vizsgálata MSZ EN 13230-2
Dynamic test in the rail cross section MSZ EN 13230-2
Woodtigue test in the rail cross section MSZ EN 13230-2
Testing of railway vibration damper elements
Shore hardness measurement MSZ EN ISO 868
Tensile test MSZ ISO 37
Water absorption MSZ 8614
Saline-acidic water absorption MSZ 8614
Aging resistance MSZ ISO 37; MSZ EN ISO 868; own specification
Force-displacement curves of rubber cover material Static test with 2 travel sensors, own specification
Elasticity characteristic DB AG NB 918071-1 DIN-45673-1
Natural building materials
Testing of adobe masonry elements
Mud brick masonry elements (dimensions and tolerances) MSZ 3576-1:2012; MSZ EN 772
Vályog falazóelemek (kamra – vagy üregtérfogat) MSZE 3576-1:2012
Mud brick masonry elements (shape) MSZ 3576-1:2012; MSZ EN 772
Clay masonry units (bulk density (dry bulk density)) MSZ 3576-1:2012; MSZ EN 772-13:2000
Clay masonry elements (compressive strength) MSZ 3576-1:2012; MSZ EN 772-1 
Clay masonry elements (adhesion strength) MSZE 3576-1:2012; MSZ EN 1052-3 
Clay vapor permeability glass method MSZ EN ISO 12572
Determination of the thermal conductivity of clay MSZ EN 1745
Testing of straw bale building elements
Straw bale building blocks (shape) MSZE 3576-2:2012
Straw bale building blocks (dimensions and tolerances) MSZE 3576-2:2012; MSZ EN 822; MSZ EN 823
Straw bale building blocks (dry density) MSZ 3576-2:2012; MSZ EN 1602
Straw bale building blocks (moisture content) MSZE 3576-2:2012; MSZ EN ISO 12571
Straw bale building blocks (contamination) MSZE 3576-2:2012
Straw bale vapor permeability glass method MSZ EN ISO 12572; MSZ EN 12086
Determination of thermal conductivity of straw bales MSZ EN ISO 6946; MSZ EN 12667
Individual tests

In addition to performing a wide range of standard tests, the Building Materials and Structures Testing Laboratory is also capable of performing custom measurements and special tests, adapting to the individual needs of our partners. Our modern equipment and expert team guarantee precise and reliable results.